
The Yealink RCH40 E2 is a Gigabit PoE+ switch designed to simplify the connection of audio and video devices in meeting rooms. With 4 Gigabit Ethernet ports, an uplink port and a total PoE budget of 90 W, it allows you to connect and power multiple compatible devices via a single network infrastructure.
Compared to the standard RCH40 version, the E2 model features QoS management and EEE deactivation, essential features for use with network audio devices such as the Yealink CM20, CS10 and Dante systems.
The switch features 4 10/100/1000 Mbps Ethernet ports dedicated to connecting devices and 1 Gigabit uplink port for connection to the corporate network.
This configuration facilitates the integration of microphones, loudspeakers and other compatible audiovisual equipment, reducing the complexity of connections in professional installations.
With a total PoE budget of 90 W, the Yealink RCH40 E2 allows compatible devices to be powered directly via the Ethernet cable, without the need for a separate power supply for each one.
Support for the IEEE 802.3af/at standards allows up to 30 W per port to be supplied, within the total available budget. This solution simplifies cabling and helps keep the installation tidy.
The RCH40 E2 version incorporates Quality of Service (QoS) technology, which allows different priorities to be assigned to network traffic based on DSCP values.
Prioritisation is particularly important in audiovisual installations, where audio and video traffic must be transmitted smoothly. The switch uses four priority levels to organise network packets.
One of the main differences compared to the original RCH40 model is the disabling of EEE (Energy Efficient Ethernet). This configuration meets the operational requirements of certain professional audio devices that do not support EEE power management.
According to Yealink, the RCH40 E2 model is the version intended for use with Yealink CM20, Yealink CS10 and Dante devices. The standard RCH40 version is not suitable for these applications.
Measuring just 100 × 100 × 23 mm, the Yealink RCH40 E2 can be easily integrated into audiovisual installations, even where space is limited.
The device features a power status LED and a PoE budget LED, which are useful for quickly checking the switch’s operation.
The Yealink RCH40 E2 is suitable for meeting rooms, video conferencing systems and IP-based audio installations requiring Gigabit connectivity and PoE+ power.
It is particularly well-suited to set-ups that include Yealink CM20 microphones, Yealink CS10 speakers and Dante-compatible devices. Before installation, check the number of ports required, the power consumption of the connected devices and the total PoE budget of 90 W.
| Feature | Value |
|---|---|
| Type | Gigabit PoE+ switch |
| Application | Audio and video networks for meeting rooms |
| Downlink Ethernet ports | 4 × RJ45 10/100/1000 Mbps |
| Uplink port | 1 × RJ45 Gigabit Ethernet |
| Data transfer rate | Up to 1000 Mbps per port |
| PoE standard | IEEE 802.3af/at |
| Maximum PoE power per port | 30 W |
| Total PoE budget | 90 W |
| PoE priority control | Yes |
| Quality of Service (QoS) | Yes |
| QoS prioritisation | Based on DSCP values |
| QoS priority levels | 4 |
| Energy Efficient Ethernet (EEE) | Disabled |
| Network audio compatibility | Yealink CM20, Yealink CS10 and compatible Dante devices |
| Power LED | Yes |
| PoE budget LED | Yes |
| Power supply | 48 V DC, 2 A |
| Dimensions (W × D × H) | 100 × 100 × 23 mm |
| Operating humidity | 5–90% |
| Manufacturer part # | RCH40-E2 |
|---|---|
| Warranty | 2 years |
| By Sector | Public administrations, Education, Corporate and Office, Health and social action |
| Is Accessory of | Conferencing |
| Lone worker protection | No |