
Yealink delivers once again with their innovation in the world of Video Conferencing Equipment. The predecessor to the Yealink VCM36-W model, the highly successful CPW90 was a game changer and this now delivers further by allowing yo to connect up to 3 units to provide more wireless coverage than before with no cable clutter.
Easily remove from the slim and discreet charger and place the Yealink expansion microphones wherever you need them in the meeting room for an instant 3-meter boost in audio pick-up range.
The Yealink wireless microphones have changed the game with their audio pick-up. Most units that use expansion mics end up having the main unit audio overridden and replaced with the expansion mics only. With the VCM36-W that is not the case. Your Yealink video conference system will benefit from the main unit still delivering top-quality sound while the VCM36-W delivers an enhanced experience making 100% Coverage possible.
For example, a 15m2 room would utilise the audio from the main unit plus one Yealink VCM36-W WiFi microphone where as you can cover a room of up to 80m2 with only three VCM36-W units.

| Manufacturer part # | VCM36-W Package |
|---|---|
| EAN | 6938818308725 |
| Warranty | 1 year |
| Accessory Type | Microphone |
| Is Accessory of | Conferencing |
| Lone worker protection | No |
Is not compatible. For the UVC40 you need the VCM34.
The Yealink VCM36 is not compatible with the A10. The A10 is not compatible with any external mics.
Yes, this mic (VCM36) is compatible with the A30, you can connect up to 2 mics. You can also use the VCM34 (up to 3), the VCM35 (up to 3) and the VCM38 (up to 3).
Yes, the VCM36-W is compatible with the A20 (firmware 133.320.0.2 or later), you can only pair 1 mic. If you want to use to 2 mics then you need either the VCM34 or VCM35.
Yes, the VCM36-W works with the MeetingBoard, you can pair up to 2 mics, make sure the firmware is version 155.15.0.46 or later.