Cisco ip handsets

Cisco handset for 89XX and 99XXThis replacement headset is compatible with Cisco 89XX and 99XX series IP phones. Designed to deliver crisp, clear sound quality, it is perfect for replacing damaged or worn headsets, ensuring that your communications are always efficient and uninterrupted.Installation of this headset is quick and easy, allowing you to get back to using your phone in no time. Its ergonomic design guarantees comfort during long calls, making it an excellent addition to your office equipment - don't miss out!

Jabra EHS handset lifter for Cisco Phones The Jabra handset lifter for Cisco phones is an EHS handset lifter designed for use with Jabra Pro 9400, Pro 920, 925 and Motion Office Headsets. It allows you to answer and end calls, even when you are away from your desk. Not to mention, it is compatible with the Cisco Unified IP 8941 and 8945 desk phones. As a result, you do not need to have your Cisco phone always on hand. Manage your calls remotely and have the flexibility to carry out other tasks, while taking your calls.Features: EHS handset lifterFor use with Jabra Pro 9400 / Pro 920 / 925 / Motion Office HeadsetsCompatible with Cisco Unified IP 8941 and 8945 desk phonesAnswer and end calls away from your phone

The Jabra LINK 14201-22 is an Electronic Hook Switch cable for connecting your Jabra GO and PRO headsets to your Cisco IP Phones. Using this cable allows you to control your calls directly from your Jabra headset. This cable is completely electronic, and does not require a mechanical handset lifterThe Jabra LINK 14201-22 is compatible with the following Cisco phones 7942G 7945G 7962G 7965G 7975GIt can be used with the Jabra GN Netcom PRO GN9470 - GN9460 range and the GO GN6430 - GN6470 range.

The Cisco IP DECT 6823 HandsetDesigned for use with the Cisco IP DECT DBS110 Single-Cell Base Station, Cisco IP DECT DBS-210 Multi-Cell Base Station, and Cisco IP DECT Phone RPT110 Repeater.Together, these products enable the convenience of a mobile DECT solution for Voice-over-IP (VoIP) service. The Cisco IP DECT 6800 Series supports many phone numbers and handsets in a system that can grow from a small storefront to cover the largest locations by adding more base stations and repeaters to the network.Installing the system is straightforward in most locations: please consult the deployment guide, which offers best practices for a successful deployment. Each handset comes with a site survey tool that provides a graphical green, yellow or red indicator of signal strength throughout the workplace. Base stations and repeaters may be wall or surface mounted with an optional mounting kit or set up to stand on a table or shelf with a stand included in each box. Each handset supports one or two lines and systems may be installed to enable a few, dozens, or hundreds of handsets.The 6823 handset has a sleek, comfortable design that clips to a belt or fits easily into a user’s pocket as they move about the workplace. The high resolution, graphical color display provides an intuitive user experience: calls may be answered quickly, and features such as transfer, conference, and hold may be activated with confidence. Each handset supports wideband audio, and long talk time in an attractively priced, high-performance system. Cisco IP DECT DBS110 Single-Cell Base StationThe Cisco IP DECT DBS-110 Single-Cell Base Station allows up to 30 SIP registrations per unit and up to 2 base stations and 12 repeaters per system. At its maximum size a DBS-110 system supports 20 concurrent narrowband or 10 concurrent wideband calls.DECT 110 Single-Cell Base Station:Up to 30 SIP RegistrationsUp to 10 Concurrent CallsUp to 6 RepeatersMulti-Cell mode: (2 Base stations)Up to 30 SIP RegistrationsUp to 20 Concurrent callsUp to 12 Repeaters Ergonomic designAn easy-to-use interface that provides a traditional Digital Enhanced Cordless Telecommunication (DECT) telephony-like user experience Graphical display1.7 in. (4.3 cm) 128 x 160 pixels, 64K TFT display6825: 2.0 in. (5.0 cm) 240 x 320 pixels, 64K TFT display Headset6823: 3.5 mm wired headset, iPhone compliant Volume controlA volume-control toggle provides easy decibel-level adjustments of the handset, monitor speaker, and ringer Full-duplex speakerphoneA full-duplex speakerphone gives you flexibility in placing and receiving calls. For added security, the Audible Dual-Tone Multi-Frequency (DTMF) tones are masked when the speakerphone mode is used Handset charging cradleThe charging cradle holds the phone in a single position. The charging cradle comes with a USB Type-A connector to directly connect the power adapter of your choice (see ordering information in Table 6 in this document). The charging adapter is 5V, 2A Keys28 total keys0-9, # and * keys3 soft keysFive-way navigation and selectAnswer and end call keys1 alarm key on top of the deviceVolume up and down keysMute key Speakerphone keyMenu keyPowerBattery type: rechargeable Lithium IonCradle charging time: 6 hoursTalk time: 17 hours (NB), 12 hours (WB)
Idle time: 200 hoursFull lines supported6823 and 6825: 2 lines (SIP registrations) CODECs 6823 and 6825 Handset:G722 codec for HD audioG726 codec for narrow band audioHD audio speakerphoneMultiple ring tonesThe phones support user-adjustable ring tonesSecurityCAT-iq 2.1 security supportPhysical dimensions (H x W x D)4.6 in. x 1.8 in. x 0.78 in. (117 mm x 46 mm x 20 mm)Weight6823 and 6825: 3 oz. (86 g)Display6823: 1.7 in. (4.3 cm) 128 x 160 pixels, 64K TFT displayPower requirements5V/2A, Type USB-A for power and additional power adapter for charging the handset. Interoperable optional AC-to-DC country-specific power supplies (such as the CP-6825-PWR-NA= for North America) Regulatory compliance:◦ CE Markings per directives 2014/30/EU and 2014/35/EU Safety:◦ IEC60950-1:2005 (2nd Edition); AM1:2009 (CE, U.S. and Canada)◦ EN60950-1:2006/ A1:2010 + A11:2009 +A1 2010 +A12: 2011 +A2: 2013 (Australia and New Zealand)◦ CB Certificate◦ UL 62368-1 (U.S., Canada)◦ UL 60950-1 (U.S., Canada)◦ EU EMC EN301489-1 V2.2.0, EN 301489-6 V2.2.0, EN 301 489-3 v2.1.1 and EN 301 489-17 v3.2.0 (CE)◦ EU SAR EN/IEC 61109-1/-2 including EN50360: A1 2010, EN 50385: 2002 (CE)◦ EU RF EN301406 V2.2.2, EN 300 328 v2.1.1; EN 301 893 v2.1.1 and EN 300 440 v2.1.1 (CE)◦ AU EMC (CISPR 32)◦ AU Safety AS/NZS 60950-1:2011◦ AU SAR EN/IEC 62209-1 (same as EU)◦ US FCC Part 15D◦ US FCC ID certificate◦ US SAR OET 65 IEEE 1528◦ CA ICES-003 Issue 5:2012◦ CA RSS-213 Issue 2:2015◦ CA IC certificate◦ CA RSS-102 (SAR)◦ CA IC REL registrationIndustry standards: Cat IQ 2.1 compliant

Jabra EHS Adapter Cable for Cisco 78, 79 and 8800 SeriesThe Jabra Link 14201-43 enables remote Electronic Hook Switch Control (EHS) with Jabra wireless headsets and the Cisco Unified IP phone 6945, 78xx, 79xx and 88xx series. Jabra wireless headsets with EHS functionality boost productivity as they provide the user with the ability to answer and end a call, while away from their desk.THE EHS ADAPTER ALLOWS THE USERS TO:Hear ring tonesAnswer and end callsMute the microphoneAll from their headset and quite convenient, when they are up to 150 meters/450 feet away from their desk. The integration of desk phone and headset allows users to benefit from enhanced mobility and the ability to multitask while on a call. The wireless freedom improves work efficiency and ergonomics throughout the day.

The Cisco ATA 191 Multiplatform Analogue Telephone Adapter converts traditional telephone, fax, and overhead paging communication equipment into IP devices, offering greater cost-effectiveness.Suitable for customers looking to bring traditional analogue devices into the IP world, the ATA 191 enables users to connect to enterprise networks, small offices or cloud-based services though two integrated standard FXS ports which can be configured as two SIP (Session Initiation Protocol) registrations.Designed to work with third-party call control systems, this analogue adapter enables users to protect and extend their existing systems without the need for major investment.Platform Support InformationThe Cisco ATA 191 Multiplatform Analog Telephone Adapter is designed to work with third-party call control systems.Licensing InformationNo license is required to connect the Cisco ATA 191 Multiplatform Analog Telephone Adapter to third-party call control systems.

The Cisco ATA 192 Multiplatform Analogue Telephone Adapter converts traditional telephone, fax, and overhead paging communication equipment into IP devices, offering greater cost-effectiveness.Suitable for customers looking to bring traditional analogue devices into the IP world, with the ATA 192 you can connect to enterprise networks, small offices or cloud-based solutions via two integrated standard FXS ports which can be configured independently as two SIP (Session Initiation Protocol) registrations. The ATA 192 also has two 100BASE-T ports with an integrated high-performance router to extend local network connectivity.Designed to work with third-party call control systems, this analogue adapter enables users to protect and extend their existing systems without the need for major investment.Platform Support InformationThe Cisco ATA 192 Multiplatform Analog Telephone Adapter is designed to work with third-party call control systems.Licensing InformationNo license is required to connect the Cisco ATA 192 Multiplatform Analog Telephone Adapter to third-party call control systems.